Description
Lucidato Polished Plaster has the "WOW" factor.
Smooth to the touch with a luxurious high glassy finish, this plaster is truly amazing.
An outstanding product with a unique look that will make your walls stand out.
Smooth to the touch with a luxurious high glassy finish, this plaster is truly amazing.
The plaster can be left unwaxed, but we recommend waxing with Decor Wax or one of our other waxes to protect the surface from everyday dirt.
The wax helps keep the surface clean and free of wear and tear, while still allowing you to showcase the beauty of the plaster.
We always recommend ordering a 1kg pot before ordering a large amount. For first-time customers or to make up a sample, the 1kg pot is a great way to sample the product.
Application
Download Our Application Guide Check out our videos
The application method of Polished Plaster typically involves the following steps:
Surface preparation: The surface to be treated with polished plaster should be clean, dry, and free from any loose or flaking material. If necessary, repair any cracks or imperfections and ensure the surface is smooth.
Primer application: Apply a coat of primer to the prepared surface with brush or roller. The primer helps with adhesion and ensures a smooth base for the Polished Plaster.
For Lucidato, you can 'knock back' the dry primer with a old trowel, scraper or sand paper to take out the high grains.
It is recommended to then the primer 10% if using over dry skimmed plaster.
1st layer application: Once the primer has dried, apply a base coat of Polished Plaster with a specialist trowel over the dried primer.
Aim for a smooth application with no trowel lines, this layer doesn't have to be too thick, aim for 2 to 3 mm.
Trowel lines and other imperfections can be trowelled out when the plaster has dried to a 'putty state'. This coat is typically applied with a trowel in an even layer.
2nd layer application is where you start to create the pattern.
Apply in patches, overlapping one patch over the next patch by 50% applying patches in all directions.
Smooth down the plaster as you go to leave an even application of patches over the entire wall area.
Final layer application: Apply the final layer of Polished Plaster, following the same process as the 2nd layer coat patching in all directions and overlapping each patch by 50%. You now need to burnish this layer with a clean fault free blade.
Burnish, cut and smooth the damp plaster every one to two square feet, repeating this process as you apply over the wall.
Waxing: To protect the polished plaster and enhance its durability, it is recommended to apply a suitable wax. The wax helps to prevent staining and makes the surface easier to clean and maintain. Follow the manufacturer's instructions for the specific sealer being used.
It is important to note that the application method may vary depending on the specific product and manufacturer. Always refer to the manufacturer's instructions and guidelines for the best results. If unsure, it is advisable to consult with a professional who has experience working with polished plaster.
Important
Please remember that colours on screen may be differ from true plaster colour. The nature of Polished Plaster is the tonal effects during application. Polished Plaster provides a unique, multi-dimensional finish that reflects the hues and tones of the environment, creating a captivating finish.
Wet plaster will always look darker than the dried finish.
Different application methods can create darker/light finishes.
Colours are mixed to order an cannot be exchanged.
Each colour is custom-mix to your order details.
I'm sorry, but we don't offer finished samples. Instead, you can order a 1 kg pot and create your sample.
This way, you can show your client the finish you have created.
Creating a starter kit for polished plaster application will depend on the scale of your project and the specific techniques you plan to use. Here's a basic list of items you might need to get started:
Primer: Covers 9 square meters per litre to painted walls, can be thinned by 10% on fresh plastered walls.
Lucidato Plaster: In the colour of your choice.
1 kilo per square meter of wall area.
Wax: Use a bees wax to protect and finish the polished plaster surface.
Trowel: Invest in a good-quality stainless steel trowel. A medium-sized trowel is versatile and suitable for most projects. All out trowels are suitable for Lucidato application. We only stock Pavan quality trowels.
Hawk: A small handheld hawk, a clean upside down towel or large spatula is useful for holding and carrying the plaster mixture as you apply it to the wall.
Cloths: Soft brushes and lint-free cloths are needed for applying the sealer and wax to the finished plaster.
Bucket & Sponge: Use a sturdy bucket with clean water to clean trowels and tools. Use a brush or sponge to clean tools as you work.
Protective Gear: Wear appropriate personal protective equipment, including gloves and safety glasses, to protect yourself during the application process.
This is a lime product and can be harmful and damaging to skin and eyes.
Additional Tips:
* Practice your application and trowel technique on sample boards before applying to the wall.
* Maintain a consistent temperature and humidity level in the room while applying and
drying the plaster.
* Work in good lighting to see imperfections and achieve a smooth finish.
With patience, attention to detail, and this guide as your companion, you can
successfully create a stunning Polished Plaster wall that will add timeless elegance to your space.
No, it is not advisable to use polished plaster in wet areas such as showers or wet rooms. However, it can be used as a feature wall in high moisture areas like the bathrooms or swimming pool walls.
All our Polished Plasters can be used outside, but they will be exposed to environmental pollutants and dirt just like any other surface. The sun's UV rays might also affect the plaster's colour fastness.
Some people appreciate the way plasters age and fade when used outdoors.
All Polished Plasters have to be applied to a finished plaster wall like you would if painting the wall. You can make a sample or practice on a single plasterboard, though, as you are not filling any joints or screw heads. Polished Plaster is a decorative application and not designed to fill the plasterboard seams and screw holes.
With practice and the right materials and tools you will be able to create a finish as with all skills the more you do it the better you will become.
While there are DIY kits available for those with some experience, achieving the desired polished plaster finish often requires skill and expertise. Professional installers are trained in the application techniques, ensuring a smooth and flawless result. They understand the nuances of the material, substrate preparation, and finishing processes, making it advisable to hire a professional for more intricate and large-scale projects.
Lucidato Polished plaster, also known as Venetian or Marble plaster, is a decorative wall finish that involves applying multiple layers of plaster. It is polished to create a smooth and lustrous surface. The key difference from traditional plaster lies in its composition and the elaborate finishing process, which gives it a unique look and appeal.
Polished plaster is known for its durability and longevity. When applied correctly, it can withstand everyday wear and tear. However, like any decorative finish, it may be susceptible to scratches and dents. Regular cleaning with a soft, damp cloth is usually sufficient for maintenance. Some may choose to apply a protective wax or sealer to enhance durability.
To achieve the best results, it is recommended to apply polished plaster on smooth surfaces. In cases where the existing wall has textures or defects, it is important to first level or smooth the surface before applying the plaster.
Lucidato comes in a wide range of colours. Our base plaster is mixed with pigments to achieve the desired hue. Some artisans even create unique effects by mixing different coloured plasters to create there own colour. This allows for a high degree of customization to match specific design preferences and aesthetics.
Upon dispatch of your order, an email will be sent to you containing a tracking link and detailed information. For any additional help, please feel free to contact us at 01535 642650
After placing your order, you'll receive an email confirmation containing all the details of your order, as well as the chosen shipping method. Once shipped your will receive your tracking details. Order are normally shipped and delivered within 2-3 business days depending on order time and day.
Shipping costs will be calculated during checkout. Our preferred shipping method for most orders is APC's next day liquid service.
